Defense and Aerospace
Aluminum and titanium structural parts in a single 5-axis setup.
- Machine type
- Machining CenterCNC Lathe
- Batch size
- Small batch (1-100)
- Typical tolerance
- ± 0,005 mm
- Cycle-time gain
- 35 %
Automotive Tier Suppliers
Cycle times under 40 seconds for axle, housing and injector parts.
Automotive suppliers must produce hundreds of thousands of identical parts a year at ±0.01 mm with a zero-defect target. Slant-bed lathes and dual-pallet machining centers combined with load/unload automation make unattended shifts possible.
Typical parts
- Axle and transmission shafts
- Brake drums and discs
- Injector and pump bodies
- Bearing housings
Recommended configuration
TV-300 with bar feeder, part catcher and robot loading; DM-850 for housing parts. SPC measurement data feeds your MES.
Typical parts
- Axle and transmission shafts
- Brake drums and discs
- Injector and pump bodies
- Bearing housings
Reference configuration
| Recommended model | TV-300, DM-850 |
|---|---|
| Typical cycle (axle shaft) | 42 sn |
| Automation | Robot loading, bar feeder |
Documents
Similar items
Mold and Tooling
Halve polishing time on mold surfaces with high-speed milling.
- Machine type
- Machining Center
- Batch size
- Single / prototype
- Typical tolerance
- ± 0,008 mm
- Cycle-time gain
- 30 %
Medical and Surgical Parts
Micron-level tolerances in orthopedic screws and surgical instrument bodies.
- Machine type
- CNC Lathe
- Batch size
- Medium batch (100-5,000)
- Typical tolerance
- ± 0,005 mm
- Cycle-time gain
- 25 %