Automotive Tier Suppliers
Cycle times under 40 seconds for axle, housing and injector parts.
- Machine type
- CNC LatheMachining Center
- Batch size
- Serial (5,000+)
- Typical tolerance
- ± 0,01 mm
- Cycle-time gain
- 28 %
Elevators and Commercial Kitchens
The laser + press brake pair for stainless cabin panels and hoods.
Elevator cabins, door leaves and commercial kitchen equipment are made from thin stainless sheet, without scratches and with clean bends. After fiber laser cutting, a CNC press brake with an angle-measurement system hits the right angle on the first part.
Typical parts
- Cabin wall panels and ceilings
- Door leaves and frames
- Hoods and worktops
- Service trolley bodies
Recommended configuration
FL-3015 6 kW with AB-100/3100; non-marking lower die sets for film-coated sheet.
Typical parts
- Cabin wall panels and ceilings
- Door leaves and frames
- Hoods and worktops
- Service trolley bodies
Reference configuration
| Recommended model | FL-3015, AB-100/3100 |
|---|---|
| Typical sheet | 0,8 – 3 mm paslanmaz |
| Angle accuracy | ± 0,3° |
Documents
Similar items
Defense and Aerospace
Aluminum and titanium structural parts in a single 5-axis setup.
- Machine type
- Machining CenterCNC Lathe
- Batch size
- Small batch (1-100)
- Typical tolerance
- ± 0,005 mm
- Cycle-time gain
- 35 %
Mold and Tooling
Halve polishing time on mold surfaces with high-speed milling.
- Machine type
- Machining Center
- Batch size
- Single / prototype
- Typical tolerance
- ± 0,008 mm
- Cycle-time gain
- 30 %