Steel Structures and Vehicle Bodies
Shorten pre-welding preparation with tube-profile lasers and heavy press brakes.
- Machine type
- Fiber LaserPress Brake
- Batch size
- Small batch (1-100)
- Typical tolerance
- ± 0,3 mm
- Cycle-time gain
- 33 %
Energy, Valves and Flanges
Heavy stock removal on cast-steel valve bodies and flanges.
Oil and gas, steam and water-infrastructure valves require heavy cuts in thick-walled castings. A gearbox spindle, wide table and reinforced Z axis suppress vibration and extend tool life.
Typical parts
- Ball and gate valve bodies
- Flanges and blind flanges
- Turbine shafts and sleeves
- Pump casings
Recommended configuration
DM-1160 with gearbox spindle; TV-450Y for large-diameter flanges. Coolant and chip systems are sized for heavy cutting.
Typical parts
- Ball and gate valve bodies
- Flanges and blind flanges
- Turbine shafts and sleeves
- Pump casings
Reference configuration
| Recommended model | DM-1160, TV-450Y |
|---|---|
| Max part weight | 1.000 kg |
| Materials | WCB, A105, 316L |
Documents
Similar items
Automotive Tier Suppliers
Cycle times under 40 seconds for axle, housing and injector parts.
- Machine type
- CNC LatheMachining Center
- Batch size
- Serial (5,000+)
- Typical tolerance
- ± 0,01 mm
- Cycle-time gain
- 28 %
Defense and Aerospace
Aluminum and titanium structural parts in a single 5-axis setup.
- Machine type
- Machining CenterCNC Lathe
- Batch size
- Small batch (1-100)
- Typical tolerance
- ± 0,005 mm
- Cycle-time gain
- 35 %